Fit Testing

Quantitative fit testing uses a machine to measure the actual amount of leakage into the facepiece and does not rely upon your sense of taste, smell, or irritation in order to detect leakage. The respirators used during this type of fit testing will have a probe attached to the facepiece that will be connected to the machine by a hose.

Many workers need to wear prescription glasses or personal protective equipment, such as safety goggles or earmuffs, while performing a job. This is just an addition to many PPE items that you may be required to wear for your safety.

You must be fit tested before you use a respirator in the workplace, and you must be retested at least every 12 months to make sure that the respirator you use still fits you. You must be fit tested with the specific make, model, style, and size of respirator that you will be using. We provide fit tests for the following:

Not everyone can get a good fit with one specific respirator. If the respirator fails the fit test, then another make, model, style, or size must be tried until one is found that fits you properly. Therefore, your employer needs to provide you with a reasonable selection of sizes and models to choose from. When you've completed the fit testing process, it's very important that you know which make, model, style, and size respirator fits your face properly, and when and where you'll need to wear it for protection.

Contact us to make your appointment today.

615-865-8813 or 615-390-3622

email: [email protected]